CONCRETE SIDEWALK/STAIRS COMPANY
To install a concrete sidewalk, start by building a form. This is the main structure of the sidewalk. It should have a slope of 1/4″ per foot. The forms must be set out about 150 square feet. Then, the forms are placed on the form and tamp the concrete firmly to get it into shape. To prevent cracking of the finished surface, make sure that the concrete delivery truck is parked nearby.
When preparing the site for concrete sidewalks, you should stake out the area. Use a T-square, a measuring tape, and twine to measure the width and depth of the space. A line level is also helpful. You should stake out the area and backfill it. Depending on the thickness of your slab, you might need
to dig a small trench to set the forms properly. After placing the forms, you must check the slope of the slab by using a level. The right end of the level should be positioned half an inch higher than the outside of the form. This will indicate a slight slope away from the building.
Once you have laid down the concrete sidewalk, it is time to add color to the concrete. To achieve this, you can apply a color to the surface of the cement. This method, known as stained concrete, will cost a little more than standard, but is less expensive than stamped concrete. If you want to do this, you should spend around $15 per square foot. Once you have laid down the sidewalk form, you can now start applying decorative finishes.
The cost of a concrete sidewalk is generally around $13 per square foot. The cost will vary, depending on location, size, and finish options. You should have a professional estimate for the project, including the dimensions and the materials. Some contractors estimate the price in cubic yards, so they can determine the exact cost for the project. For example, a private walk leading to the front entrance should be at least 3 feet wide. A service walk should be about two feet wide. A concrete sidewalk that is only two to three feet wide should be four to six feet thick.
The final step of the process is laying the concrete sidewalk. It is essential to place control joints to prevent the concrete from spreading randomly over the sidewalk. The bottom of the trench should be at least 6 inches below grade and four to seven inches below that. The finished sidewalk should not be shorter than 4 inches. However, it should be level with the grass. Once the concrete has been laid, you should apply the finish. If you have already placed a previous layer of concrete, it is important to ensure that you fill in the same spot with a new one.
In order to pour the concrete correctly, you should make sure that the weather is as cool as possible. If the weather is too hot, you may be able to pour the concrete on one of the sides of the walkway, but if it is cold, it may be difficult to finish the job. It is better to wait for cooler weather before ordering your concrete. This will ensure a smoother and more durable sidewalk. So, choose the best color for your concrete sidewalk.
When pouring concrete on your sidewalk, it is essential to set the forms correctly to ensure that they do not stick out and cause damage to the concrete. It is also important to be patient and practice the proper procedures when it comes to laying the forms. Once you have laid the concrete on the sidewalk, you should be able to install the curbing. Once the walkway has been laid, it will look great and enhance your home’s curb appeal.
FREE INSTANT QUOTE
ENTER YOUR INFO BELOW