CONCRETE DRIVEWAY COMPANY

Concrete Driveway

A concrete driveway is a durable surface, which can be laid on any type of terrain. However, the thickness and type of concrete used to construct it will depend on the size of the space, the loads it will be exposed to, and the surrounding soil. Before installing a concrete driveway, be sure to consult the city building department for details. The following tips will help you determine the thickness of the concrete. Read on for helpful advice. Also, keep in mind that a thicker driveway may cost more.

You can get a concrete driveway resurfaced for a few hundred dollars per square foot, but it is best to use a professional to ensure the quality of the result. After you repair the cracks, you can then apply the sealant. A crack filler is the best choice for small cracks, and it’s fluid and self-leveling. It’s important not to overfill the cracks, since this will show the crack underneath the sealant.

If you want to avoid having to pay for repairs, a professional installation is the way to go. While you can always hire a contractor to install a new concrete driveway, it is better to seek professional advice. They will evaluate the extent of damage, and will give you an accurate quote. Generally, these repair jobs cost $2.00 to $4.00 per square foot. A professional will typically charge around $65 to $85 per hour for labor.

When installing a concrete driveway, you should consider the compressive strength of the slab. A residential driveway requires a minimum of three to four inches of thickness. Commercial driveways require a thickness of four to five inches. For heavier vehicles, however, a thicker slab should be used. In addition, you can add rebar to the concrete to improve its tensile, flexural, and compressive strength. By adding rebar to the concrete, you can boost the compression strength by approximately 600 psi and 11,780 psi. Depending on the diameter of the steel, you can choose to have a smooth or textured surface.

After placing a concrete driveway, you must consider its slump. Slump refers to the stiffness and consistency of fresh concrete. The test results are reported in inches. The amount of water in a freshly mixed concrete will affect the slump. Slump can be increased or decreased by admixtures and the type of aggregate used. Typical driveways have a five-inch-plus-one slump. Unlike some types of concrete, the thickness will vary from one to another.

Before laying a concrete driveway, make sure to check the conditions of the area to see how it was installed. A new driveway might have been laid on top of soil, but it may not be level. This means that the slab will be lower than the surrounding landscape. It is important to avoid high-puddles in the area around the driveway. Similarly, excessive exposure to sun and moisture can weaken the structure of a concrete driveway.

After pouring a concrete driveway, it is important to consider the use of the area. A concrete driveway for light vehicles will be fine with a 3 to four-inch thick pad, but a heavy vehicle will need a thicker slab. A heavy delivery truck will need to drive on the driveway, but it will not be fully loaded. It will not be possible to drive on a driveway that is made of thin-sand.

Concrete is a great material to use for a driveway because it is durable and easy to clean. It can be poured over a variety of surfaces, allowing you to customize your driveway to fit your style and taste. Then, you can choose a decorative concrete material that will suit your home’s architecture. You can choose from different options, and the best one for you is the one that best matches the overall theme of your house.

Concrete driveways need to be installed using a special process. The first step is to remove all vegetation and make sure that the soil foundation is stable. Then, wood forms are placed around the perimeter of the driveway. Next, class five gravel is poured onto the base of the new driveway. It is important to compact and grade the gravel before pouring concrete. Afterward, you must add reinforcement material. This can be in the form of a steel wire grid or metal rebar.

FREE INSTANT QUOTE

ENTER YOUR INFO BELOW

9 + 13 =

0/5 (0 Reviews)