Concrete Driveway Resurfacing

It’s no secret that driveways and parking areas can take a beating over the years, especially when they’re used regularly. If your concrete driveway is starting to look worse for wear, it is time to consider resurfacing it. This process can breathe new life into your driveway and is not as complicated or expensive as you might think. Keep reading for more information on how to get started.

What is concrete driveway resurfacing?

Concrete driveway resurfacing is a process that involves concrete driveway repair, whereby the entire concrete driveway doesn’t need to be removed and replaced. This can be a less expensive and faster option than concrete driveway replacement. 

Driveway resurfacing can include concrete repairs such as fixing cracks, holes, or pits; leveling sunken concrete slabs; and repairing damaged edges. It can also involve adding a new layer of concrete on top of the existing concrete driveway. 

This new layer can be stamped and colored to give the concrete driveway a new look. Driveway resurfacing is not only less expensive and faster than concrete driveway replacement but it can also be done to achieve a wide variety of aesthetic goals.

What are the benefits of concrete driveway resurfacing?

Concrete driveway resurfacing is a process whereby a new layer of concrete is applied to an existing concrete surface. There are many benefits to concrete driveway resurfacing, including the following: 

• It’s economical & doesn’t break your bank account: Resurfacing is usually much cheaper than replacing an entire concrete driveway since only a thin layer of concrete is required. 
• It’s easy to apply & saves time: Applying a concrete resurfacing layer is generally quicker and easier than laying down an entirely new concrete driveway. 
• It allows for different designs & colors: Concrete resurfacing will enable you to experiment with different designs and colors, which can lead to a more aesthetically pleasing finish. 
• Increases resilience to future wear & tear: By adding a resurfacing layer, you are effectively adding another layer of protection against future wear and tear. 
• It can increase the value of your home: A well-resurfaced concrete driveway can add value to your home, making it more appealing to potential buyers if you ever decide to sell up.

Can you resurface an existing concrete driveway?

It’s possible to resurface an existing concrete driveway without tearing it out and starting from scratch. This process, known as concrete driveway resurfacing, involves applying a new layer of concrete over the existing surface. To do this successfully, it’s important to prepare the surface by cleaning it and repairing any cracks or damage. 

Once the surface is ready, you can apply a concrete coating using a roller or brush. The thickness of the layer will depend on the condition of the existing concrete and the desired results. With proper preparation and care, concrete driveway resurfacing can give your driveway a brand-new look.

Can you resurface a cracked concrete driveway?

You can concrete resurface a driveway to cover larger cracks or surface problems. Large cracks or holes greater than ¼”, spalling (horizontal peeling or chipping of the concrete surface), and discoloration can be covered with concrete resurfacing or a concrete overlay (a thin layer of cement-based material applied directly over the existing concrete). 

If you have concrete driveway resurfacing done, it will improve the looks of your home and add to its value. Besides being an eyesore, cracked concrete drives can become dangerous as people can easily trip on them. Smoothing out the surface will make it safe once again.

Is it worth it to resurface a concrete driveway?

Resurfacing provides a beautiful new finish without all of the time, effort, and money required for a total replacement. In addition, resurfacing can be an effective way to repair cracks and other damage. However, it is essential to remember that resurfacing will not address more serious structural issues. As a result, homeowners should consult with a professional before deciding whether concrete resurfacing is right for them.

How long does concrete resurfacing last on the driveway?

When done correctly, concrete resurfacing can last for 10-15 years. The key to long-lasting concrete driveway resurfacing is choosing a high-quality concrete mix and adequately preparing the surface before resurfacing. If you are not confident in your ability to do this, it is best to hire a professional concrete contractor to ensure that the job is done correctly. 

In addition, it is essential to seal the concrete after resurfacing to protect it from weather damage and stains. With proper care, your concrete driveway resurfacing will last many years.

Do you need planning permission to resurface a driveway?

Resurfacing a concrete driveway is a great way to update the look of your home and increase its curb appeal. And, in most cases, you won’t require planning permission as long as the new driveway uses permeable (or porous) surfacing. 

This type of surfacing allows water to drain through it, which helps to reduce the risk of flooding and minimize the impact on the local environment.

How do you resurface a crumbling concrete driveway?

Crumbling concrete driveways are not only unsightly, but they can also be dangerous. Over time, the concrete can break down, leaving cracks and gaps that pose a trip hazard. If you have a concrete driveway that needs resurfacing, there are a few things you need to do to ensure that the job is done correctly. 

First, you will need to remove any loose concrete or debris from the driveway’s surface. Next, you will need to repair any cracks or holes in the concrete. Once the repairs are complete, you will need to apply a new layer of concrete to the driveway. 

Finally, you will need to seal the concrete to protect it from wear and tear. If you follow these steps, you can resurface your concrete driveway and make it look new again.

How do you prepare a driveway for resurfacing?

When it comes time to resurface a concrete driveway, a few steps must be taken to ensure the new surface will adhere properly. First, the existing surface must be cleaned of all dirt, debris, algae, and weeds. This can be done with a pressure washer or a concrete cleaner. Once the surface is clean, any cracks or holes should be repaired. 

The concrete should then be allowed to dry entirely before resurfacing. If the concrete is not dry, the new surface will not adhere properly and could eventually crack or peel. Resurfacing a concrete driveway is an effective way to give it a fresh new look. By preparing the surface properly, you can ensure that the new concrete will last for years to come.

How many times can you resurface a driveway?

Concrete driveway resurfacing is a great way to extend the life of your driveway and improve its appearance. The good news is that concrete driveway resurfacing is a relatively simple and inexpensive process. In most cases, a concrete driveway can be given 2-3 overlays before the entire surface needs to be replaced. By resurfacing your driveway regularly, you can extend its lifespan and keep it looking new for many years.

How thick can you apply concrete resurfacer?

Concrete resurfacer is a type of concrete designed to be applied in very thin coats, no more than 1/2 inch thick. It is a solid product, rated for compressive strength of about 4,500 psi. Concrete resurfacer is used for concrete driveway resurfacing. 

The concrete resurfacer provides good adhesion to an existing concrete slab. When a concrete resurfacer is used for concrete driveway resurfacing, it will give the driveway a new and improved look.

When should I resurface my driveway?

Over time, concrete driveways can develop cracks and pits that make them look unsightly and can even cause damage to vehicles. Resurfacing is a process that involves putting a new layer of concrete over the existing driveway. This can help to restore the strength and smoothness of the concrete surface. It is generally recommended to resurface a concrete driveway every 3-5 years to keep it in good condition. 

However, if the driveway is particularly damaged, it may need to be resurfaced more frequently. Resurfacing not only helps to improve the appearance of your driveway, but it also provides an extra layer of protection against weathering and wears.

What is the life expectancy of a driveway?

The average concrete driveway has a lifespan of 25 to 30 years, though this will vary depending on installation methods, environmental conditions, and temperatures. Proper care is essential to maintaining your driveway’s longevity. 

Each season, keep an eye out for wear and tear and take steps to repair any damage. Cracks can be filled with concrete crack filler, while more widespread damage may require concrete driveway resurfacing. Taking these preventative measures can help ensure that your concrete driveway stands the test of time.

How much does concrete driveway resurfacing cost?

Resurfacing concrete driveways costs an average of $3 per square foot, but prices can range from $2 to $4 per square foot. The resurfacing cost will depend on the size and condition of your driveway and the resurfacing material you choose. For example, concrete overlay systems are more expensive than concrete stains or sealers. 

However, they also provide a more durable finish lasting many years. When considering the cost of concrete driveway resurfacing, it’s essential to compare the long-term prices with the initial investment. In most cases, concrete resurfacing is a more cost-effective option than a complete replacement.

The Duluth Concrete Company can help you resurface your concrete driveway. To help you find the ideal design for your house, we provide a choice of colors and textures. Our crew has expertise in resurfacing driveways, and we’ll work with you to ensure the job is done correctly. Call us at 218-489-3165 if you’re interested in finding out. Thanks for reading.